Inozetek Wraps in Miami & Fort Lauderdale
Almost nobody searches for a film brand by name. They search "car wrap near me" and figure out the rest at the shop. If you typed Inozetek, you are already past that part — you have seen the Super Gloss on someone's car, you know what you want on yours, and what you actually need is a South Florida shop that stocks it and knows what its data sheet asks for.
We install 3M, Avery Dennison, Inozetek and Hexis, and we are certified with Evolve Films. Inozetek is the one clients ask for by name, and it is almost always Super Gloss. Our catalog carries 105 Inozetek colors across five finish families — 67 in the Super Gloss line and 38 in Frozen Satin and Frozen Matte.
It is also the film with the least room for error. Inozetek publishes a 10-degree recommended installation window and a dry-application-only method; 3M publishes a 30-degree window and an adhesive engineered to slide and reposition. That difference is the whole reason this page exists — and the reason our entire shop in Davie is climate-controlled instead of a bay with a fan in the doorway.
What Inozetek is, on the data sheet
Inozetek publishes the same technical block on every wrapping film it sells, and the numbers explain the finish better than any adjective does.
- Face film 3.7 – 4.1 mil, with a separate 1.6 mil adhesive layer. That is a heavy film by wrap standards.
- Low-tack solvent acrylic adhesive, described by the manufacturer as long-term low-tack removable, with a PET protective liner and a PET release liner.
- Dry application. Not wet, not a soap-and-water slip solution.
- Recommended installation temperature 70 – 80 °F (24 – 26.5 °C).
- Post-heat 175 – 185 °F (79.5 – 85 °C) — a specified step, not an optional finishing touch.
- Resists most mild acids, mild alkalis and salt.
- Even the unopened roll has a spec: two years from the manufacture date, stored indoors at 68 – 78 °F and 50% relative humidity.
The manufacturer describes the SuperGloss line as delivering a high-gloss, paint-like finish with depth and clarity. That is the honest description. Laid correctly, people ask whether the car was repainted.
Super Gloss and Frozen: the two families the brand is known for
Our Inozetek catalog runs 105 colors. It splits almost two-thirds to one-third between the gloss side and the flat side.
Super Gloss (31 colors) is the reason people learn the brand's name. SG001 Black Out and SG002 White Out are the two that sell hardest, then SG004 Nardo Grey, SG015 Miami Blue, SG739 Corsa Red, SG730 Maritime Blue, SG736 Papaya Orange and SG734 Racing Yellow. SG006 Blood Red and SG007 Lava Orange are the loud end of the shelf.
Super Gloss Metallic (27 colors) adds flake under the gloss: MSG112 Metallic Black, MSG024 Midnight Blue, MSG025 Midnight Purple, MSG111 Racing Green, MSG122 Royalty Purple, MSG016 Metallic Silver and MSG114 Vampire Red.
Super Gloss Pearlescent (9 colors) is the smallest and strangest group — PG028 Pearl White is the safe one, PG032 Pearl Unicorn CS actually shifts color with the viewing angle.
Frozen Satin (21 colors) and Frozen Matte (17 colors) are the other half of the brand. Frozen Matte kills reflection outright: FM3008 Frozen Matte Black, FM3006 White, FM3001 Shadow Grey, FM3009 Shark Grey, FM3013 Army Green. Frozen Satin holds a soft sheen instead — FS2023 Nardo Grey, FS2014 Pearl White and FS2001 Metallic Grey are the ones that move.
Some of these sit on our shelf. The rest we order for your car. We tell you which is which at the consult, before you commit to anything.
Why Inozetek asks more of the installer than a 3M 2080
This is not brand loyalty talking. Put the two published data sheets side by side and the difference is measurable.
- Application window. 3M lists an application temperature range of 65 – 75 °F for its 2080 series — a 30-degree window. Inozetek recommends 70 – 80 °F. Ten degrees.
- Adhesive behavior. 3M's Controltac adhesive is pressure-activated and built to slide, tack, snap up and reposition, with Comply air-release channels. Inozetek uses a low-tack solvent acrylic and specifies dry application. It is a less forgiving system to place.
- Thickness. 3M 2080 measures 4.5 mil with adhesive. Inozetek runs 3.7 – 4.1 mil of face film plus 1.6 mil of adhesive. A thicker film fights you harder around a mirror cap, a bumper corner or a deep body line.
- Post-heat. Inozetek names an exact post-heat range of 175 – 185 °F. Skip it or guess at it and the film remembers where it was stretched.
One more thing worth knowing: Inozetek's own published warranty covers peeling, delamination, adhesive failure and color fade — and it specifically excludes orange peel. On a super gloss film, orange peel is the one defect your eye catches from ten feet away in a parking lot. Nobody warranties it off your car later. It is decided on the day of the install, by whoever is holding the squeegee.
A 70-degree film in a 90-degree state
Inozetek's recommended installation temperature is 70 – 80 °F. South Florida spends most of the year outside that. In August, an open bay with the door up is not close.
Our entire shop is climate-controlled — not one room, not a portable unit pointed at the car. That is not a comfort feature; it is what makes it possible to meet the film's own installation spec and hold the post-heat step properly. Dust and humidity are what put bubbles and lifted edges under vinyl, and neither one gets in here.
The rest of how we work follows from the same logic:
- Handles, badges and trim come off where the design calls for it, so the film wraps under an edge instead of stopping at it.
- Panel by panel, planned before a single sheet is cut — where every seam lands, how each edge gets finished.
- 30 to 40 vehicles a month, on purpose. Fewer cars on the floor means yours gets the hours it actually needs.
- Ten years in the same Davie bay and 4,600+ vehicles through it.
See the color on your own car before you commit
Picking Super Gloss from a phone screen is guessing. A metallic flake barely renders, and satin and matte look identical in a photo.
So do it the other way around. Start with our wrap visualizer to narrow 105 colors down to three or four, then bring the car in. We lay the actual Inozetek film against your own paint in daylight and you compare finishes side by side until one is obviously right.
You leave with a written price for your exact vehicle and finish. No deposit to book the consult, and no obligation to buy anything.
What an Inozetek wrap costs
Full color change wraps at Elite start at $3,000. The final number depends on the film and finish you choose, how much of the vehicle comes apart, and the condition of the paint underneath — which is exactly why we inspect the car first and then quote it, instead of quoting a range over the phone.
Not every Inozetek job is a full car. A chrome delete in SG001 Black Out, a Frozen Matte roof, mirror caps in Super Gloss Metallic — partial work is priced on its own and costs far less than wrapping every panel.
0% financing for 12 months through Synchrony applies to every service we offer, with an approval decision in minutes at the shop. The inspection before any of it is free.
Where to get Inozetek installed in South Florida
The shop is at 4651 SW 51st St, Unit 812 in Davie — next to the Hard Rock Hotel, five minutes off I-595. That puts us a short drive from Miami, Fort Lauderdale, Hollywood, Pembroke Pines, Plantation, Weston and Aventura.
If the car is staying with us, our Loaner Car Assistance covers the gap: Enterprise is a mile away, we book it at our partner rate of roughly $35 a day and drive you over. When you return it, they bring you back to the shop. No extra charge either way.
Wrapping is usually step one of a build. Most Inozetek clients add paint protection film on the impact areas so the front end survives I-95, and a ceramic coating over the wrap — which matters more on Frozen Matte and Frozen Satin than most people expect, because a coated flat finish is far easier to wash without burnishing it. All of it happens in the same shop, on the same car, on the same schedule.
Open Monday through Saturday, 9 AM to 5 PM. Call or text (786) 876-7891 or (954) 335-3693.
About Inozetek Wraps in Miami & Fort Lauderdale
Is Inozetek better than 3M or Avery Dennison?
It is different, not automatically better. Inozetek's Super Gloss line produces the deepest paint-like gloss of the three and it is what clients ask for by name. 3M 2080 has the widest published application range (65 – 75 °F) and a Controltac adhesive built to slide and reposition, which makes it more forgiving on complex bodywork and on commercial and fleet jobs. Avery Dennison SW900 sits between them with the largest color catalog of the three. We install all three and we will tell you which one suits your specific car, finish and budget at the free inspection.
What is the difference between Inozetek Super Gloss and Frozen Matte?
Gloss level, and nothing else about the film changes. Super Gloss is the mirror finish that reads as fresh paint — 31 colors in our catalog, plus 27 metallics and 9 pearlescents. Frozen Matte kills reflection entirely, 17 colors, and Frozen Satin sits between the two with a soft sheen across 21 colors. Both families share the same construction: 3.7 – 4.1 mil face film, 1.6 mil low-tack adhesive, dry application, and the same 175 – 185 °F post-heat spec. The flat finishes hide body imperfections better; the gloss finishes show every one, which is why we inspect the paint before quoting either.
Why does an Inozetek wrap need a climate-controlled shop?
Because the manufacturer recommends installing it at 70 – 80 °F — a 10-degree window — and specifies dry application with a 175 – 185 °F post-heat. In South Florida, an open bay is outside that window most of the year. Our entire shop is climate-controlled, so the film goes on inside its own spec rather than whatever the afternoon happened to be. Humidity and airborne dust are the other half of it: they are what put bubbles and lifted edges under vinyl weeks later.
Can you order an Inozetek color that is not in your catalog?
Usually, yes. We carry 105 Inozetek colors and keep the fastest-moving ones on the shelf, but the rest are ordered per job. Bring us the code — SG, MSG, PG, FS or FM — or a photo of the car you saw, and we will confirm availability and lead time before you book anything. If a color has been discontinued or is back-ordered, we say so and show you the closest match in Inozetek, 3M or Avery so you can compare them in person.
Does Inozetek come with a manufacturer warranty?
Inozetek publishes a limited warranty on its wrapping film covering material and workmanship defects — peeling, delamination, adhesive failure and color fade. Two conditions are worth knowing before you book at any shop: the manufacturer requires the film to be installed by an authorized Inozetek installer and the warranty card submitted to them within 30 days of installation, and the warranty explicitly excludes orange peel, normal wear, road debris and severe weather, as well as installation over repainted surfaces, primer, chrome, carbon fiber and light housings. We confirm in writing which warranty applies to the exact film you choose before any work starts.
Book a free Inozetek consult. Bring the car to our climate-controlled shop in Davie, we lay the actual film against your own paint in daylight, and you leave with a written price for your exact vehicle and finish. No deposit to book, no obligation to buy. Call or text (786) 876-7891 or (954) 335-3693, Monday to Saturday, 9 AM to 5 PM — 4651 SW 51st St, Unit 812, Davie, FL 33314, five minutes off I-595.
Protect it now. Pay over 12 months.
0% financing for 12 months with Synchrony. Approval in minutes, on every service.
Hundreds of 5 star reviews. Zero shortcuts.
Whether you want…
← swipe / use the arrows →
Showing 176 of our verified 5-star Google reviews · see them all on Google →
Common Questions
Pick a category — written answer plus the Ceramic Pro video for each.
What is ceramic coating?
▶How long does ceramic coating last?
▶How long does it take to install ceramic coating on my car?
How do the warranties work?
What can a ceramic coating protect against?
Does the quality of a ceramic coating really matter?
What is the difference between DIY and professional ceramic coatings?
How do I maintain a ceramic coating?
What products can I use to maintain my ceramic coating?
What are the things I need to avoid when the ceramic coating is done?
Can I DIY a ceramic coating on my car?
▶Ceramic coating vs wax — what's the difference?
▶What is the best ceramic coating?
▶How do you remove a paint scratch?
▶What is PPF?
PPF vs Ceramic Coating
▶What are the benefits of paint protection film?
▶How much does PPF cost?
▶Is PPF worth it?
▶Why is PPF so expensive?
▶How important is a good paint protection film installation?
What does the Ultimate Armor package include?
▶How long does PPF last?
▶Can you ceramic coat over PPF?
▶How long does Ceramic Pro Urban last?
How is it different from premium Ceramic Pro PPF?
Which package should a daily driver get?
Can I wash it normally?
Is it worth it?
Vinyl wrap or PPF color change — which should I choose?
How much does it cost to wrap a car in Miami?
Is a wrap better than repainting my car?
How long does a car wrap last in Florida?
Does a wrap damage my paint?
Which car wrap brands do you install?
What is a chrome delete?
Can I wrap just the roof, mirrors or accents?
Do you offer financing on car wraps?
What is window tint VLT (visible light transmission)?
▶Is ceramic tint better than regular tint?
▶How long does ceramic window tint last?
▶What should I do after getting my windows tinted?
▶What is windshield protection film?
Is the film installed on the inside or outside of the windshield?
How does the film protect my windshield?
Will it affect my visibility while driving?
Does the film block UV rays?
Will it help in an accident?
How long does windshield protection film last?
Will my wipers scratch the film?
Three ways to start
Get an instant quote Build your quote online → Call or text Visit the shopDavie, FL 33314