Overview
Car Wraps, Paint Protection and Ceramic Coating in Davie, FL
Our address is 4651 SW 51st St, Unit 812, Davie, FL 33314. That is most of what this page is here to say. Elite Premium Detailing is not a van that pulls into your driveway or a booth that moves when the lease runs out — it is a climate-controlled shop in Davie, five minutes off I-595 and next door to the Hard Rock Hotel, where 4,600+ vehicles have been corrected, wrapped, filmed and coated.
Davie is a strange town for paint. Nova Southeastern's 314-acre campus sits on one side of it, Pine Island Ridge and the ranch properties on the other, and I-595, SR-84 and Griffin Road run grit across both. Add about 65 inches of rain a year, an average maximum UV index of 7 from May through September, and irrigation water that on a lot of Davie properties comes straight out of a private well. Most of this page is about that specific set of problems and what we actually do about them.
Every service we sell happens inside that one building — car wraps and color change, paint protection film, Ceramic Pro coatings, KAVACA window tint, paint correction, wheels and calipers. Nothing gets subcontracted and nothing leaves the shop. There is a free inspection before anything starts, a written price for your exact vehicle, and 0% financing for 12 months through Synchrony on every service we offer.
Every service, in the same building
Davie clients do not have to pick a different shop per job. Wrap, film, coating, tint and correction all happen here, on the same car, on the same schedule, by the same crew.
Car wraps and color change
Full color change, satin and matte black, color-flip and textured films, chrome delete, roof and accent work. Color change wraps start at $3,000. We install 3M, Avery Dennison, Inozetek, Hexis and Evolve.
See Vinyl →Paint protection film
Self-healing urethane on the panels that take the hits, from $899, in partial front, full front, track and full body coverage.
See Paint →Colored and matte PPF
Color and rock-chip protection in one film. Matte PPF starts at $5,549.
See Matte →Ceramic Pro coatings
From $499, plus wheels and calipers, glass, leather and interior coatings.
See Ceramic →KAVACA ceramic window tint and windshield protection film
Heat and glare out of the cabin, chips off the glass.
See Window →Paint correction and headlight restoration
The step that has to happen before anything gets sealed over the paint.
See Paint →Wheel powder coating and caliper color change
See Wheels →Maintenance
For cars already protected here.
See Maintenance →Anything not priced above is quoted per vehicle after a free inspection. We do not publish a range and then adjust it once you are standing in the shop.
Over ten years serving South Florida
Elite Premium Detailing operates from Davie: 4651 SW 51st St, Unit 812, Davie, FL 33314. We are a Certified Ceramic Pro Elite Dealer, and 4,600+ vehicles have gone through this floor.
- The whole shop is climate-controlled. Not one booth with a fan and an open roll-up door. Dust and humidity are what put bubbles and lifted edges under film and dirt in a curing coating, and neither one gets in here.
- Thirty to forty vehicles a month, on purpose. A shop running a hundred cars a month is not giving any of them the hours a full wrap or a multi-stage correction actually takes. We would rather turn work away than rush it off the floor.
- Five minutes off I-595, south of the highway near Griffin Road, next to the Hard Rock Hotel. Easy in, and easy back out toward Fort Lauderdale, Miami or the Turnpike.
- Monday to Saturday, 9 AM to 5 PM. Call or text (786) 876-7891 or (954) 335-3693.
You can walk in during those hours, stand on the floor and look at a car that is mid-job. In this industry that is not a small thing.
What Davie actually does to a finish
South Florida water comes out of limestone. The Town of Davie's System III plant draws its groundwater from the Biscayne Aquifer and aerates, softens, filters, disinfects and fluoridates it before it ever reaches a hose. Even softened, it still leaves mineral behind when it dries on hot paint. That is all a water spot is.
The bigger problem in Davie is the water that gets no treatment at all. A lot of properties here irrigate from private shallow wells, and that water carries iron. When it lands on paint, glass and wheel faces and then bakes dry in the sun, the iron oxidizes and bonds to the surface — the same orange staining Davie homeowners fight on driveways, pavers and stucco. On a car it reads as a dull orange cast low on the doors, along the rockers and across the wheels, and a normal wash does not touch it.
Stacked on top of that:
- Around 65 inches of rain a year, most of it between June and September, and an average maximum UV index of 7 from May through September.
- Lovebug flights in late April and May, then again from late August into September. Crushed lovebug remains start close to neutral, around pH 6.5, and turn acidic — roughly pH 4.25 — inside about a day. Left on hot paint over a weekend, they etch it.
- Road grit off I-595, SR-84 and Griffin Road, plus lime rock and sand carried onto pavement from the unpaved shoulders and ranch roads on Davie's west side.
None of this is exotic. It is just what a car parked outdoors in 33314 lives through — and it is why a coating that rinses clean and a film that eats the impact are worth more here than they are in most of the country.
Roofs and hoods age first, and the film makers say so
Here is the part most shops skip. Wrap and film durability figures are published for vertical surfaces. Your doors and fenders are vertical. Your roof, hood and trunk lid are not, and they do not last the same.
- 3M rates Wrap Film Series 2080 at up to eight years of MCS Warranty on vertical applications, and states plainly that the warranty varies by zone.
- Avery Dennison defines durability as the period a product is expected to perform satisfactorily when applied in vertical exposure conditions. Its published SW900 figures are vertical figures. Horizontal panels carry their own, far shorter terms.
- Avery's own bulletin cuts the warranty by 20% for non-vertical surfaces — anything 10 to 45 degrees off vertical — and cuts it again depending on which geographic exposure zone the car lives in: 20% in one zone, 60% in another.
- 3M lists angle and direction of sun exposure, environmental conditions, and cleaning and maintenance methods among the things that decide how long a graphic actually lives. It also recommends storing wrapped vehicles in a temperature-controlled garage.
We would rather you hear that before you pay than after. It changes real decisions: whether the roof gets wrapped at all, whether paint protection film goes on the hood underneath the vinyl, whether a coating goes over the top so the horizontal panels can be rinsed instead of scrubbed. If a shop quotes you one number of years for a whole car without asking where it parks, they are quoting you a brochure.
Keeping it that way, by the manufacturers' own rules
Most wraps and coatings that fail early in Florida fail because of how the car was washed, not how it was installed. The film makers are specific about this, so we are too.
- Never scrub film. 3M says scratching and abrasion marks may not be able to be worked out of the film's finish, and to avoid harsh chemicals and brushes.
- Watch what is in the soap. 3M asks for a cleaner that is wet, non-abrasive, free of solvents, and between pH 3 and 11. Avery Dennison states that products containing petroleum distillates or solvents — including some soaps, waxes and protective coatings — void the warranty outright.
- Matte and satin are the fussiest finishes you can own. Avery warns that matte materials are subject to extreme color and gloss shift when exposed to cleaners, wax and polish. If you want low-effort matte, that is an argument for a coating, not for a bottle of wax.
- Abrasion and gloss loss are treated as normal wear. Avery does not cover them under any warranty, and it does not warrant paint staining that shows up after removing film that has already cracked or discolored. Read our warranty page before you assume anything about what is covered and what is not.
- Point the sprinklers away from the driveway. In Davie that is the cheapest thing you will ever do for your paint, and it matters most on well irrigation. If well water does land on the car, rinse it before it dries.
- Rinse after a lovebug flight the same day, not next weekend.
Leaving the car with us
The first visit is an inspection, and it costs nothing. We go over the paint with you under lights, tell you what needs correcting before anything goes over it, and hand you a written price for your exact vehicle. No deposit to book it.
- Loaner Car Assistance. Enterprise is about a mile from the shop. We book it at our partner rate — around $35 a day — and drive you over. On the way back you leave the rental at the branch and they bring you to us. Neither ride costs extra. To be clear about what this is: it is help getting a rental, not a free courtesy car.
- 0% financing for 12 months through Synchrony, on every service we offer, with an approval decision in minutes right in the shop.
- Updates at each stage while the car is here — not one phone call on the day it is finished.
- Monday to Saturday, 9 AM to 5 PM. Short jobs can start the same day. A full color change, a full body film or a multi-stage correction with a coating over it is measured in days, and we will give you the real number before you hand over the keys.
Davie first, then the rest of Broward and Miami-Dade
Davie sprawls, so here are the reference points. We are south of I-595 near Griffin Road, minutes from Nova Southeastern University's 314-acre campus and from Pine Island Ridge — the 101-acre natural area that holds the highest natural elevation in Broward County, all 29 feet of it. Downtown Davie's western-themed district and the Bergeron Rodeo Grounds are a short drive north. The Hard Rock Hotel is next door.
Davie is also one of the last places in South Florida where horses are legally kept on residential property, with town-maintained equestrian trails on the west side. The practical version of that, for a shop: the same bay takes a ranch-road pickup in the morning and a garage-kept exotic in the afternoon, and neither one gets a different standard.
Because we are here, everything around us is close. Cooper City is under ten minutes. Plantation is one exit west on I-595. Hollywood is ten minutes up US-441, Fort Lauderdale fifteen minutes down the 595, Weston straight down Royal Palm Boulevard, and Miami about thirty minutes up the Turnpike. If you are outside Davie, the areas we serve page has the page for your city.
About Car Wraps, Paint Protection and Ceramic Coating in Davie, FL
Common questions
Where exactly is the Davie shop, and can I just walk in?
4651 SW 51st St, Unit 812, Davie, FL 33314 — south of I-595 near Griffin Road, next door to the Hard Rock Hotel. We are open Monday to Saturday, 9 AM to 5 PM, and you are welcome to walk in during those hours. If you want the inspection done properly and someone's full attention while you compare finishes, call or text (786) 876-7891 first and we will hold a slot for you.
Will the roof and hood last as long as the doors and fenders?
No, and no honest installer will tell you otherwise. Manufacturers publish durability for vertical surfaces: 3M rates Wrap Film Series 2080 at up to eight years of MCS Warranty on vertical applications, and Avery Dennison defines durability as performance in vertical exposure conditions, with shorter terms for anything off vertical. Sun angle is the reason, and in South Florida it is unforgiving. We plan around it during the inspection — sometimes that means paint protection film under the vinyl on the hood, sometimes a coating over the top so the roof gets rinsed instead of scrubbed.
My irrigation runs off a well and the car has orange staining. Can that come off?
Usually, yes. That is iron out of the well water that oxidized on the surface, and it comes off with proper decontamination rather than washing harder. What decides the job is how long it sat and whether it has etched into the clear coat, which is exactly what the free inspection is for. Surface staining comes out with decontamination and polishing. If it has etched, that is paint correction. Once the paint is clean again, a coating is what makes the next round rinse off instead of bonding.
Can I get a rental while my car is in the shop?
Yes, through our Loaner Car Assistance. Enterprise is about a mile from us. We book it at our partner rate, around $35 a day, and drive you there. When you are done you leave the rental at the branch and they bring you back to the shop. We do not charge for either ride. Being straight about it: this is help getting a rental, not a free courtesy car.
Is the whole shop really climate-controlled, and does it change anything?
The entire shop, not one booth, and it changes two different things. Dust and humidity are what put bubbles and lifted edges under film, so the install itself needs a controlled room. Coatings then need a stable environment to flash and cure properly, which a driveway in a Davie August is the opposite of. 3M goes as far as recommending that wrapped vehicles be stored in a temperature-controlled garage — which tells you what heat does to film even after it is on the car.
Book the free inspection at 4651 SW 51st St. We go over the paint with you under lights, tell you what actually needs doing before anything goes over it, and hand you a written price for your exact vehicle — no deposit, no obligation. Call or text (786) 876-7891, or build your quote online.
Protect it now. Pay over 12 months.
0% financing for 12 months with Synchrony. Approval in minutes, on every service.
Reputation
Hundreds of 5 star reviews. Zero shortcuts.
Whether you want…
← swipe / use the arrows →
Showing 176 of our verified 5-star Google reviews · see them all on Google →
Common Questions
Pick a category — written answer plus the Ceramic Pro video for each.
What is ceramic coating?
Ceramic Pro 9H is our flagship heavy-duty, permanent protective coating. It has a glossy, hydrophobic finish that lets water and other liquids bead off the surface easily, protecting your paint from staining, UV damage, bugs, dirt, and debris. The protective finish not only guards the paint but makes washing incredibly easy — dirt and grime slide right off, and aggressive scrubbing isn’t required.
▶How long does ceramic coating last?
A ceramic coating can last anywhere from 6 months to a lifetime. The longevity of a ceramic coating largely depends on the quality of the product used, the application process, and the care taken to maintain it. A high-quality, layerable coating will last a few years with proper maintenance. Check our Ceramic Pro Packages to discover what is the best option for your car.
▶How long does it take to install ceramic coating on my car?
All our Ceramic Pro Coating Packages includes a whole preparation process before the coating installation: Premium exterior wash, Chemical decontamination, 1-Step Finest polish Timing to properly perform the coating installation may vary depending on the vehicle size and Ceramic Coating package selected. Estimated installation time: - Bronze Package (2-Year Warranty) - 1 / 2 day - Silver Package (5-year Warranty) - 2/ 3 days - Gold Package (Lifetime Warranty) - 3 / 4 days - Ion Pack (7-year Warranty) - 1/2days - Ultimate Ion (Lifetime Warranty) - 2/3 days THIS LEVEL OF SLICKNESS, PROTECTION AND DURABILITY IS ONLY FOUND IN CERAMIC PRO COATINGS
How do the warranties work?
Enjoy the benefit of a CARFAX Documented warranty for each package sold, and you’ll quickly discover that choosing Ceramic Pro coatings and PPF is a true investment that can improve your vehicle’s resale value. CERAMIC PRO is the only nationwide paint protection Brand to earn the title CARFAX Certified. This means every service we perform is listed on your CARFAX report, which increases resale value and helps with insurance claims.
What can a ceramic coating protect against?
Ceramic coatings protect against environmental contaminants. It provides resistance to UV rays, preventing oxidation and fading over time. Ceramic coatings protect against staining, road salts, bird droppings, and tree sap. When installed, the coating creates a chemical-resistant surface, making it easier to clean. Ceramic coatings provide a high level of hydrophobic protection, allowing for water to bead up and roll off the surface, reducing the likelihood of water spots and mineral deposits forming on the paint – this is important in areas with hard water.
Does the quality of a ceramic coating really matter?
A high-quality coating matters significantly for a vehicle’s maintenance and overall appearance. Higher-quality coatings provide superior durability and forms a stronger, and more resilient bond with your vehicle’s paint. This creates a robust layer that can withstand environmental contaminants and UV rays far more effectively and for a longer period of time. Higher-quality coatings are also far more resistant to chemicals than cheaper and lower-quality coatings. This means that higher quality coatings ensure that your paint is truly protected from contaminants, long-term.
What is the difference between DIY and professional ceramic coatings?
Professional-grade ceramic coatings, which are applied by experienced detailers, tend to last longer than consumer-grade products. Professional-grade products typically offer superior protection against environmental contaminants, and UV rays due to the higher concentration of certain ingredients in professional coatings. Professional coatings are engineered to be layerable, allowing for longer-lasting protection. On the other hand, DIY coatings offer less durability, often needing reapplication after a few months.
How do I maintain a ceramic coating?
Maintenance is important in determining how long a ceramic coating will last. Regular maintenance using pH-neutral soaps, avoiding abrasive cleaning methods, and periodic maintenance with products designed to work with ceramic coatings can extend the life of the coating. With professional coatings, annual inspections are necessary to extending the longevity of your coating.
What products can I use to maintain my ceramic coating?
Using an aftercare soap, like Americana Global Ceramic Aftercare Soap, that has been formulated to work with professional-grade nano ceramic coatings. This soap in particular, is a pH-neutral formulation with aggressive surfactants that remove contaminants that settle on ceramic coatings, leaving behind a crisp and clean surface. This Ceramic Aftercare Soap allows the ceramic coating to maintain and showcase its hydrophobic and protective qualities.
What are the things I need to avoid when the ceramic coating is done?
After getting a Ceramic Pro installation, you should avoid: Automatic car washes: The brushes can scratch the coating; always hand wash your car instead. Harsh chemicals: Do not use abrasive cleaning products, waxes, or polishes that could damage the coating. Letting water dry on the surface: This includes tap water, which can leave mineral spots; always dry your car thoroughly after washing. Parking under trees: Bird droppings, sap, and pollen can damage the coating if left on for too long. Abrasive cleaning methods: Avoid using rough sponges, dirty microfiber cloths, or aggressive drying techniques. DIY detailing practices: Unless you are very experienced, avoid attempting to polish or wax your ceramic coated car yourself. Not using dedicated car wash products: Use a pH-balanced car wash soap specifically designed for ceramic coatings.
Can I DIY a ceramic coating on my car?
You can — but doing it right takes four crucial steps: decontaminate the paint, correct it, apply the coating, then level it after it flashes. You'll need an applicator sponge, at least two microfiber towels, and a clean, controlled environment. The key is an even coat with no streaks or high spots, worked in small sections. The biggest factor is prep: if you don't properly decontaminate and paint-correct first, the coating won't look right or perform as intended — which is exactly why most owners choose a professional install.
▶Ceramic coating vs wax — what's the difference?
Wax was the gold standard for over 50 years — it's inexpensive and adds a nice depth of shine, but you have to reapply it every one to two months. Ceramic coating creates a much tougher defense against what actually matters: UV damage, bug splatter, tree sap, oxidation, bird droppings, heat and harsh car-wash detergents. It delivers a high-gloss shine that doesn't fade, makes water bead off for low-maintenance cleaning, and lasts up to seven years — or a lifetime with proper maintenance. It comes down to your priorities and budget.
▶What is the best ceramic coating?
Ceramic Pro ION, hands down. Nano-ceramic coatings have become the standard for protecting paint, and Ceramic Pro ION takes it further with ion-exchange technology. It's the first multi-layer ceramic coating built as a two-component system: the base coat bonds permanently to your paint, while the top coat exchanges ions with the base to create a coating that's harder, thicker and more durable than traditional layered coatings. For durability, stain resistance and a hydrophobic effect that lasts, ION stands above the rest.
▶How do you remove a paint scratch?
It starts with assessing the scratch. We wash with soap, water and a soft microfiber towel to lift loose contaminants, then use a clay bar with a specialized lubricant to pull out contaminants embedded in the clear coat. Next comes machine polishing — a dual-action polisher with a foam pad and the right cut compound, worked slowly in a crosshatch pattern, then wiped down with a paint-safe microfiber towel. Done correctly, swirls and light scratches come right out, restoring the finish across the whole vehicle.
▶What is PPF?
Paint protection film, also known as clear bra, clear wrap, or paint shield, is a transparent yet resilient film applied seamlessly to your vehicle’s exterior. PPF effectively shields your car’s paint from a variety of hazards, including bird droppings, UV-ray exposure, bug splatters, as well as chips and scratches caused by road debris and rocks. The top layer of this urethane film features “self-healing” properties through elastomeric polymers, reverting to its pristine, pre-incident condition, even when scratched.
PPF vs Ceramic Coating
They protect in different ways — and many clients get both. PPF is a transparent film applied over your paint that acts as a physical barrier against scratches, road debris and rock chips, with self-healing properties — minor scratches disappear with heat. Ceramic coating is a liquid-glass barrier that adds hydrophobic, self-cleaning properties plus a deep glossy finish, but it doesn’t stop rock chips the way film does. PPF gives physical impact protection; ceramic gives gloss and easy cleaning. The strongest protection combines both.
▶What are the benefits of paint protection film?
Paint protection film protects your vehicle from scratches, rock chips, staining, corrosion, fading, chemicals, insects, and road debris. It helps keep your paint looking like new, saving you money and improving your resale value. A good quality PPF has self-healing properties that allow small scratches to disappear with the application of heat.
▶How much does PPF cost?
It varies with the size of your vehicle, the quality of the film, and how many panels you cover — each panel is individually cut and stretched to its contour. A high-quality full-body installation starts at $4,990 on a compact vehicle and runs to about $6,490 on larger vehicles needing full coverage. A partial kit is far more accessible — a full front starts at $1,799 and a partial front at $899. Start with the high-impact areas that need the most protection and build from there.
▶Is PPF worth it?
It comes down to peace of mind and how long you plan to keep the car. PPF protects against rock chips, scratches, oxidation and UV rays — the kind of damage that can significantly drop your trade-in value. It isn’t bulletproof, but it prevents most paint damage. One thing to avoid is cheap film with no warranty: it yellows over time, lets rocks through, and ends up costing thousands to replace early. Quality film protects both your paint and your resale value.
▶Why is PPF so expensive?
To better understand the price tag of PPF, we need to talk about what goes into the installation process. PPF installation requires thorough prep work in order to ensure that all dust and debris has been removed. This allows the film to properly adhere to the applied surface. Each piece of PPF is custom cut to fit each panel of your vehicle and provide maximum coverage. The quality of the film and the quality of the installation are what gives paint protection film a high price tag.
▶How important is a good paint protection film installation?
The more skilled the installation is, the longer your film will last. A highly skilled technician will likely wrap the edges of the film around each panel of your vehicle, providing a seamless appearance and longer lasting protection. When the edges are tucked, it reduces the likelihood that the film will lift.
What does the Ultimate Armor package include?
The Ultimate Armor package is our best-selling combination of Ceramic Pro PPF and coatings. Paint protection film goes on the front nose and high wear-and-tear areas, Ceramic Pro coatings are installed over the entire exterior and on top of the film, and Ceramic Pro Glass plus Wheel & Caliper coatings finish every surface — layered protection with a lifetime warranty.
▶How long does PPF last?
Paint protection film typically lasts five to ten years or more. Three things decide it: the quality of the film, the quality of the installation, and how you maintain the car afterward. It's not install-and-forget — regular washes with PPF-friendly products keep it looking new, and an annual professional inspection makes sure every panel stays fully covered and protected. Always go to an experienced installer whose film comes with a warranty. PPF isn't forever, but with the right maintenance it's the best way to keep your vehicle looking like new.
▶Can you ceramic coat over PPF?
Yes — and we highly recommend it. If you know you won't be washing the car every month, adding a ceramic coating on top of your paint protection film buys you time and protection. PPF alone is excellent against physical damage like rock chips; a ceramic coating adds a glossy, hard barrier that also handles chemical damage — especially acidic contaminants like bird droppings that can etch the paint if left too long. Together, film plus coating gives you the most complete, lowest-maintenance protection.
▶How long does Ceramic Pro Urban last?
It's warrantied for 10 years against yellowing, cracking, and peeling.
How is it different from premium Ceramic Pro PPF?
Urban is the smart-value tier with a 10-year warranty. Premium Ceramic Pro PPF adds a thicker, ceramic-coated film and a Lifetime Warranty. Both use a Clear MAX self-healing top coat and both are installed by our certified team.
Which package should a daily driver get?
Most start with Partial or Full Front — that's where nearly all the rock chips land.
Can I wash it normally?
Yes, and the slick, hydrophobic surface makes washing easier.
Is it worth it?
One rock-chip repaint can cost more than the package. It protects your paint and your resale value.
Vinyl wrap or PPF color change — which should I choose?
Colored PPF (Ceramic Pro SHIFT) gives you color AND rock-chip protection in one film — it costs more than vinyl but does two jobs. Vinyl wrap offers far more colors and finishes at a lower price. We install both and quote both so you can compare side by side. See our PPF color change page for SHIFT details.
How much does it cost to wrap a car in Miami?
Full color change wraps at Elite start at $3,000 for a compact, $3,500 for a standard sedan, $3,800 for an SUV and $3,950 for a large SUV. The final price depends on the film you choose — 3M, Avery Dennison, Inozetek or Hexis — and the finish. Book a free inspection and we quote your exact car with the exact film in hand.
Is a wrap better than repainting my car?
For most drivers, yes. A wrap is reversible — your factory paint stays untouched underneath, which matters for resale value and factory finish. It installs in days, not weeks, and when you want the next look you remove or swap it. A respray is permanent, and on a healthy factory finish it usually lowers the car’s value rather than raising it.
How long does a car wrap last in Florida?
Quality film professionally installed lasts 5–7 years in Florida with reasonable care. Garage parking and hand washing extend it; harsh sun exposure and automatic car washes shorten it. Adding a ceramic coating on top of the wrap makes washing easier and helps the finish last.
Does a wrap damage my paint?
No — it protects it. The vinyl shields the factory paint from UV and light abrasion the entire time it is on the car. On healthy factory paint, removal is clean. That is why wrapped cars often resell better: the original paint has been covered the whole time.
Which car wrap brands do you install?
We install 3M, Avery Dennison, Inozetek and Hexis vinyl, and we are certified with Evolve Films. Every brand has its own color and finish catalog — gloss, satin, matte, color-flip, textured — and we help you compare them on a physical sample before committing your car.
What is a chrome delete?
A chrome delete wraps the factory chrome trim — window surrounds, grille accents, badges — in gloss or satin black for a cleaner, more modern look. It is one of the most popular partial wrap services we do, and it is fully reversible.
Can I wrap just the roof, mirrors or accents?
Yes. Roof wraps, hoods, mirrors, spoilers and accent packages are all available on their own. Partial wraps are a popular way to change the car's attitude without a full color change budget.
Do you offer financing on car wraps?
Yes — 0% financing for 12 months with Synchrony, on every service. Approval takes minutes and you can check if you pre-qualify without impacting your credit score. See our financing page for details.
What is window tint VLT (visible light transmission)?
Window tint darkness is measured as VLT — visible light transmission, the percentage of light let through your windows. The lower the number, the darker the tint: 5% is very dark, 50% lets about half the light through, and films range from about 5% up to 80%. One thing most people don't know: clear automotive glass already measures around 70–75% VLT on its own, so the legal reading is the combination of your glass plus the film. Every state has different legal limits, so check your local laws before choosing a shade.
▶Is ceramic tint better than regular tint?
Window tint is about more than looks — it's comfort, protection and efficiency. Ceramic tint is a top-tier film: it blocks up to 99% of UV rays, rejects solar heat without darkening your visibility, won't fade or change color over time, and causes zero signal interference. Regular dyed or metallic films are more budget-friendly and still block some heat and UV, but they can fade, discolor, and interfere with cell or GPS signal. Ceramic costs more upfront but delivers the best performance and saves you money long term.
▶How long does ceramic window tint last?
A quality ceramic film lasts a very long time — often backed by a lifetime warranty. The difference is the warranty and the film quality: cheap big-box or DIY films typically last only one to two years and rarely carry a warranty. To maximize its life, have it professionally installed and clean it regularly with ammonia-free products. Ceramic tint is still a thin film that can be damaged — if it is, it still works but may need replacing for looks. For its heat rejection and clarity, it's well worth it.
▶What should I do after getting my windows tinted?
A few simple steps: don't roll your windows down for three to five days (48 hours is usually enough on hot days) so the film doesn't shift or peel. It's normal to see water pockets, small bubbles, haziness or an orange-peel texture at first — that's the adhesive curing and bonding to the glass, and it clears up on its own. When you clean, use a soft microfiber towel and an ammonia-free cleaner; ammonia and harsh chemicals damage the film. Keep it simple and gentle.
▶What is windshield protection film?
A multi-layer, optically clear film bonded to the outside of your windshield that shields it from rock chips, road debris and pitting — invisible armor for your glass. On modern cars, where cameras, sensors and heating elements are built into the windshield, it can save you from a very expensive replacement.
Is the film installed on the inside or outside of the windshield?
On the exterior surface, so it absorbs impacts from rocks and road debris before they ever reach the glass — real protection without affecting visibility or driving safety.
How does the film protect my windshield?
It absorbs the impact of stones, gravel and debris that would otherwise crack or chip your glass, helping you avoid a costly repair or a full windshield replacement. On South Florida highways like I-95 and the Turnpike, that adds up fast.
Will it affect my visibility while driving?
No. The film is optically clear and engineered to stay perfectly transparent — no distortion, glare or visual obstruction, day or night.
Does the film block UV rays?
Yes. It helps block harmful UV rays, protecting your interior from sun damage and fading and making for a more comfortable drive.
Will it help in an accident?
It doesn't make your windshield unbreakable, but it reinforces the glass and helps it stay intact longer during an impact, which can reduce the risk of shattering.
How long does windshield protection film last?
With professional installation and proper care it offers long-lasting protection. Exact lifespan varies with driving conditions and exposure, but high-quality film is built for durable, everyday performance.
Will my wipers scratch the film?
No — it's engineered to withstand normal, everyday wiper use. Like any exterior surface it can show wear over time, especially with old, damaged or dirty blades, so keeping your wipers in good shape and your windshield clean helps it last and stay clear.
Service area
Car Wraps, PPF & Ceramic Coating for all of South Florida
Fort Lauderdale
Miami
MiamiAventura
Get in touch
Three ways to start
Get an instant quote Build your quote online → Call or text Visit the shop4651 SW 51st St, Unit 812
Davie, FL 33314
Davie, FL 33314
Mon–Sat · 9 AM – 5 PM